Acoustic Sounds
Pro-Ject Classic Reference Audiophile Turntable
By: Tracking Angle

October 31st, 2024

Category:

Industry News

Like the Old Burger King Ad, Pro-Ject Says "Special Orders Don't Upset Us"

in fact the only way to get the Classic Reference turntable is to special order it

Mistelbach, Austria – October 28th, 2024Pro-Ject Audio Systems introduces The Classic Reference turntable. Consider it a supremely upgraded Classic EVO or an enhanced version of the VPO (Vienna Philharmonic Orchestra) 175 limited edition turntable, The Classic Reference merges aesthetic appeal with the latest and greatest hi-fi implements by Pro-Ject.

 For this latest innovation, the brand used the EVO 9 AS HG tonearm. High-precision ABEC 7 bearings are housed in a massive aluminum gimbal for frictionless, resonance-free operation. An internally-damped S-shaped aluminum armtube makes way for a removable headshell so that cartridge enthusiasts are empowered to swap transducers to their liking. The high-mass aluminum alloy record platter is damped with TPE (Thermoplastic Elastomer), eliminating unwanted resonance. The Clamp it record clamp and Leather it record mat are included in-purchase for additional resonance control.

 The tonearm is mounted to a massive aluminum alloy top-plate supported by TPE pods sandwiched between it and the MDF plinth. The record platter rotates on an aluminum sub-platter which is belt-driven by the AC motor. The AC motor is fed steady, clean power by Pro-Ject’s own DC/AC generator which decouples the turntable from the AC mains. Balanced, full-sized XLR outputs are now onboard! This means you have the option of connecting The Classic Reference to any phono stage with corresponding inputs. RCA/ground, of course, remains onboard as well and is ready for use with the supplied Connect it Phono E cable set.

 The Classic Reference is available for special order only. Select between silver with a gloss black plinth ($5,999) or brass with an Acacia plinth ($6,999).

Visit the Pro-Ject USA Web Listing:

 

The Classic Reference Features:

 

-          High-end 9″ S-shaped tonearm (EVO 9 AS HG)

-          Removable headshell for simple cartridge swapping

-          Balanced XLR & single-ended RCA outputs

-          Low-friction zircon pin-point cardan bearings

-          Electronic speed control (33, 45/78rpm)

-          Fully adjustable azimuth & VTA

-          TPE-decouple aluminum top over MDF plinth

-          Precision-balanced TPE-damped aluminum platter

-          TPE-damped counterweight

-          Clamp it record clamp included

-          Leather it turntable mat included

-          Height adjustable decoupling feet

-          Handmade in Europe

Technical Specifications:

-          Speed: 33, 45(78)rpm (electronic speed change)

-          Drive principle: belt drive

-          Platter: 300mm aluminum with TPE damping ring

-          Mains bearing: stainless steel

-          Wow & flutter: 0.03% (33rpm), ±0.04% (45rpm)

-          Speed variance: ±0.08% (33rpm), ±0.10% (45rpm)

-          Signal to noise: 73dB

-          Tonearm: EVO 9 AS HG

-          Effective arm length: 230mm

-          Effective arm mass: 24.2g

-          Overhang: 18mm

-          Included accessories: 15V DC / 0.8A power supply, dust cover, Leather it, Clamp it

-          Dimensions (WxHxD): 462 x 138 x 335mm (closed cover)

-          Dimensions (standard): 18.19 x 5.43 x 13.19″

 

 

 

Comments

  • 2024-11-01 11:40:31 PM

    RickS wrote:

    Sweet looking table for the price. With a 24gr effective mass arm, it should perform well with many low compliance cartridges, I would think.